The Clark Fork is a beautiful double pedestal root
base vanity that can be set up for a single sink or for a
double sink.
The double "his & hers" design can be customized with top lengths, character
wood, drop in basins or vessel sinks. The model shown on the right is 30" tall
with a 6" stone vessel sink. The shelves and branches were a special touch added
by the interior designer for this home.
The Clark Fork can be designed for a large bath or scaled down for the
smaller powder room or half bath. We carry a selection of top
quality sinks and faucets which you can specify from to match your interior
décor, or if you have something special in mind, we can fit a faucet and sink of
your choice to customize your vanity.
Specifications:
Height – The finished counter height of our drop in basin
sink vanities averages 36". For applications using a vessel sink, subtract the height
of the vessel from 36" to get your finished counter height, unless a special
height is required.
Counter Top Length – Standard top lengths are 42", 48", 52".
Custom lengths are available.
Top width – Standard top width varies from 20" – 28".
Faucet – Whether you choose from our faucet selection or
specify one of your own, we strongly recommend that we pre-fit and test mount
your faucet before the vanity is shipped. This will prevent unnecessary jobsite
modification, possible damage to a custom fit top and make it easier for your
plumber to complete installation. All vanities are prepared to accept standard
plumbing connections, if there are installation questions, we will be happy to
guide your builder or tradesperson as necessary. All drain, supply, and plumbing
connections should be installed by a licensed plumbing contractor.
Sink – Our standard sink is a 17" hand hammered copper drop
in basin. Each sink is pre-fit and ready for plumber’s installation. Also,
standard with each copper sink is an Oil Rubbed Bronze drain kit.
Optional Features:
Finish (+$350.00) Stain and finish is optional. We offer
professional grade finishes on our vanities including several coats of hand
rubbed stain and high grade urethane. This process begins with a thorough
surface preparation and wood conditioner providing multiple layers of protection
that beads water and keeps your counter surface looking great.